Transient Thermal Analysis of Cylinder Fins with Holes by Using Different Materials

Pradeep Kumar; Animesh Singhai

Transient Thermal Analysis of Cylinder Fins with Holes by Using Different Materials

Authors: Pradeep Kumar, Animesh Singhai

Unique Paper ID: 146798
Volume: 5
Issue: 1
PageNo: 930-935

Keywords: Engine Cylinder Fins Geometry Material Thermal Analysis ANSYS

Abstract:
The combustion chamber of engine cylinder of motor cycle is subjected to a high temperature and thermal stresses, on which fins are, mounted in order to cool the cylinder, fins are provided on the cylinder to increase the heat transfer rate. In this report thermal analysis of engine block with fins were analyzed. By doing thermal analysis on cylinder block fins, it is helpful to know the heat dissipation inside the cylinder. Fins are basically mechanical structures which are used to cool various structures by the process of convection. Most part of their design is basically limited by the design of the system. But still certain parameters and geometry could be modified to better heat transfer. In most of the cases simple fin geometry is preferred such as rectangular fins and circular fins. Many experimental works has been done to improve the heat release of the internal combustion engine cylinder and improves fin efficiency. The model of engine block fins has been developed in 3D software ANSYS 14.5and Transient thermal analysis is done on the fins and the block to determine temperature variation in transient state that is, with holes .The Thermal analysis is done by using ANSYS software. Analysis is conducted with varying two materials also. In this thesis report two models were created with holes in software and modified design of the same model were analyzed, and comparison of two models according to geometry and material wise analyzed. Finally Magnesium alloy has given the best heat transfer for this analysis

email to a friend

Cite This Article

ISSN: 2349-6002
Volume: 5
Issue: 1
PageNo: 930-935

Transient Thermal Analysis of Cylinder Fins with Holes by Using Different Materials

Available:https://ijirt.org/Article?manuscript=146798

24 Feb, 2019

CFD ANALYSIS ON SHELL AND COILED TUBE HEAT EXCHANGER FOR HEAT TRANSFER AUGMENTATION DUE TO AIR BUBBLES INJECTION

04 Oct, 2018

Performance Evaluation for Thermal comfort on Earth Air Heat Exchanger with Different Material with and without Fin for heating using CFD

Impact Factor
8.01 (Year 2024)

UGC Approved
Journal no 47859

Join Our IPN

IJIRT Partner Network

Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.

Join Now

Latest Publication

Recent Conferences

NCSEM 2024

National Conference on Sustainable Engineering and Management - 2024 Last Date: 15th March 2024

Submit inquiry