CFD ANALYSIS ON SHELL AND COILED TUBE HEAT EXCHANGER FOR HEAT TRANSFER AUGMENTATION DUE TO AIR BUBBLES INJECTION

Prof. O.P Shukla; Bablu Kumar Yadav

CFD ANALYSIS ON SHELL AND COILED TUBE HEAT EXCHANGER FOR HEAT TRANSFER AUGMENTATION DUE TO AIR BUBBLES INJECTION

Authors: Prof. O.P Shukla, Bablu Kumar Yadav

Unique Paper ID: 147620
Volume: 5
Issue: 9
PageNo: 256-261

Keywords: Shell and helical coil heat exchanger Air bubbles injection NTU Nusselt number Effectiveness Heat transfer coefficient CFD.

Abstract:
In this work, attempts are made to increase the number of thermal units (NTU) and performance in a horizontal shell and coiled tube heat exchanger via air bubble injection into the shell side of heat exchanger. Besides, exergy loss due to air bubble injection is investigated. Indeed, air bubble injection and bubbles mobility (because of buoyancy force) can intensify the NTU and exergy loss by mixing the thermal boundary layer and increasing the turbulence level of the fluid flow. Air bubbles were injected inside the heat exchanger via a special method and at new different conditions in this work.If an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. Air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. This mechanism was employed to enhance the heat transfer rate of a horizontal Shell and Helical tube heat exchanger. The main scope of the present work is to clarify the effect of air bubble injection on the heat transfer rate and effectiveness through a horizontal Shell and Helical tube heat exchanger. However it can be used in any other type of heat exchanger. Especially, this method can be expanded as a promising heat transfer improvement technique in automotive cooling system, for instance in radiator which contains of water or other liquid fluid. The ANSYS FLUENT 14.5 has been used for numerical analysis using multiphase- Eulerian and energy. The k-ϵ standard turbulent model has been used. The graph has been plotted for Nusselt number, NTU, effectiveness and overall heat transfer for different diameter of air bubbles. It has been observed that the 0.7mm diameter of air bubbles has best heat transfer.

email to a friend

Cite This Article

ISSN: 2349-6002
Volume: 5
Issue: 9
PageNo: 256-261

CFD ANALYSIS ON SHELL AND COILED TUBE HEAT EXCHANGER FOR HEAT TRANSFER AUGMENTATION DUE TO AIR BUBBLES INJECTION

Available:https://ijirt.org/Article?manuscript=147620

04 Oct, 2018

Performance Evaluation for Thermal comfort on Earth Air Heat Exchanger with Different Material with and without Fin for heating using CFD

25 Jun, 2018

Transient Thermal Analysis of Cylinder Fins with Holes by Using Different Materials

Impact Factor
8.01 (Year 2024)

UGC Approved
Journal no 47859

Join Our IPN

IJIRT Partner Network

Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.

Join Now

Latest Publication

Recent Conferences

NCSEM 2024

National Conference on Sustainable Engineering and Management - 2024 Last Date: 15th March 2024

Submit inquiry