Structural and Thermal Analysis of Piston, Connecting rod and Crank shaft assembly using Catia and Ansys Software

Ravi Ranjan; Prof. D. S. Rawat; Dr. Sumit Rai

Structural and Thermal Analysis of Piston, Connecting rod and Crank shaft assembly using Catia and Ansys Software

Authors: Ravi Ranjan, Prof. D. S. Rawat, Dr. Sumit Rai

Unique Paper ID: 162161
Volume: 10
Issue: 8
PageNo: 115-123

Keywords: Piston Connecting rod Crank shaft Catia Ansys Software

Abstract:
The primary role of the piston is to change the volume of the combustion chamber in an internal combustion engine. The piston is in contact with the hot gases that come out burning. In addition to thermal stress, depending on the operating mode of the engine, the piston is required to change the incoming force. Therefore, the iron piston passes because of the high inertial force, and the lightweight aluminum pistons cannot work at high temperatures. Therefore, the analysis should include a rigid body analysis and a dynamic body analysis. So the power applied to the parts when the engine is moving should be calculated and this power is used to calculate the dynamic stress on the profit part i.e. connecting rod. It is proposed to modify two new sets of materials for building parts of the assembly and investigate the parameters by performing a dynamic, dynamic and thermal analysis, thermal analysis involves the analysis of heat flow, temperature distribution through the temperature of the surface of the piston. By looking at the results of both analyses, we can determine whether our designed piston is safe under the applied load conditions. So finally a comparative study is done by showing the different results of the analysis of pistons using different materials.

email to a friend

Cite This Article

ISSN: 2349-6002
Volume: 10
Issue: 8
PageNo: 115-123

Structural and Thermal Analysis of Piston, Connecting rod and Crank shaft assembly using Catia and Ansys Software

Available:https://ijirt.org/Article?manuscript=162161

31 May, 2024

Analysis of Rectangular Shape Microstrip Patch Antenna for Wireless Communications

18 Jan, 2024

ASSESSMENT OF PHYSICOCHEMICAL AND BIOLOGICAL PARAMETERS ON THE QUALITY OF WATER OF MADHOTAL LAKE WITH VARIOUS LOCATIONS AND SUGGESTING LINE OF TREATMENT ACCORDINGLY

19 Dec, 2023

STUDY AND ANALYSIS OF SOIL STABILIZATION USING WASTE PLASTIC MATERIAL

26 Sep, 2023

Study and Seismic Analysis of High Rise Buildings using Etabs Software

26 Sep, 2023

Study and analysis of time history analysis of G+10 stories RCC buildings using Etabs Software

10 Aug, 2023

AN EXPERIMENTAL INVESTIGATION ON STRENGTH OF CONCRETE BY USING HYPO SLUDGE AND FLY-ASH WITH SEVERAL STAGES

21 Jun, 2023

Study and analysis of the bond strength of metakaolin geopolymer with e-waste plastic at room and elevated temperature

09 Apr, 2022

Study and Analysis on Ambient Air Quality at different location of Satna City M.P.

05 Feb, 2022

Design and analysis of Three-Phase Grid-Connected with Solar PV power based using MPPT Device

21 Jan, 2022

Modular multilevel converter performance improvement for electric vehicle charging system

Impact Factor
8.01 (Year 2024)

UGC Approved
Journal no 47859

Join Our IPN

IJIRT Partner Network

Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.

Join Now

Latest Publication

Recent Conferences

NCSEM 2024

National Conference on Sustainable Engineering and Management - 2024 Last Date: 15th March 2024

Submit inquiry