Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{145293,
        author = {Mahesh P. Patil and M.T. Shete},
        title = {Deburring in drilled holes by EDM process-A Review},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {4},
        number = {8},
        pages = {463-471},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=145293},
        abstract = {In this review paper deburring operation perform by various researcher are reviewed. Burr formed in drilling operation using electrical discharge machining (EDM) and with different electrode. The process parameters involve in the deburring operations are directly affect on MRR ,EWR, SR. In many research it is found that burr removal operation of composite materials also can be done by EDM ,ECM , AJM as compare to other conventional machining. Burrs are form in most of the machining process like drilling, grinding and other modification procedss but the burr cannot eliminate.So, after the controlling process parameters it can be minimise. Electrode materials like aluminium, copper, brass, graphite can be use depending on the which deburring is performed. Burr removal is essential for functioning of product in operation so deburring using EDM provides better solution for removal burrs from workpiece materials},
        keywords = {Drilled hole, Deburring, Burr formation, EDM, Electrode wear.},
        month = {},
        }