Optimization of MQL in grinding with CBN  wheels

T PARAMESH; B PRASHANTH

Optimization of MQL in grinding with CBN wheels

Authors: T PARAMESH, B PRASHANTH

Unique Paper ID: 145225
Volume: 4
Issue: 7
PageNo: 745-752

Keywords: grinding minimum quantity lubrication (MQL) cutting fluid optimization MQL with water

Abstract:
The use of cutting fluids is fundamental to machining processes, mainly when it comes to high heat generation, which is the case of grinding. Thus, lubrication and cooling provided by cutting fluids improve the final quality of the work piece. However, cutting fluid usage provide some drawbacks concerning environmental, costs and health issues. Therefore, new methods for application and optimization of cutting fluids are being researched aiming to reduce the amount of fluid used, as well as the minimization of cutting fluid hazards. The present study analyzes the behavior of a recently proposed optimization method, up to now only tested in turning, which consists of adding water to minimum quantity lubrication (MQL). Three different proportions were tested in this study: 1/1, 1/3 and 1/5 parts of oil per parts of water. The following output variables were evaluated: surface roughness, roundness errors, grinding power and diametric wheel wear. Also, optical microscopy and micro hardness measurements were conducted, in order to detect burns and surface alterations. The obtained results were also compared to conventional (flood coolant) cooling-lubrication and traditional MQL (without water). MQL with water (1/5) presented better results of surface roughness and roundness errors, when compared to traditional MQL, and the results are very close to when using flood coolant. For grinding power and wheel wear, the results for MQL with water (1/5) were the best among the tested conditions.

email to a friend

Cite This Article

ISSN: 2349-6002
Volume: 4
Issue: 7
PageNo: 745-752

Optimization of MQL in grinding with CBN wheels

Available:https://ijirt.org/Article?manuscript=145225

22 Nov, 2017

A Stochastic Reward Nets (SRNs) Model to Investigate Data Center Performance and QoS in IaaS Cloud Computing Systems

19 Oct, 2017

Design of Improved Social Event Story Board From Image Click-Through Data

07 Oct, 2017

A New Design and Analysis for Voltage-Controlled DSTATCOM

27 Sep, 2017

An Optimal Energy Management Strategy for Standalone DC Microgrids

27 Sep, 2017

A Grid Connected Dual Voltage Source Inverter with Improvement Power Quality Features

27 Sep, 2017

STATCOM With Energy Storage For Power System Oscillation

09 Aug, 2017

Characterization and Investigation of Bending Test on Hybrid(Sisal and Banana) Fiber Reinforced Polyester Composite Material

08 Aug, 2017

AUTOMATED IRRIGATION SYSTEM USING GSM AND WIRELESS SENSOR NETWORK

15 Jul, 2017

Switching Losses And Harmonic Investigations In Multi-Level Inverter

15 Jul, 2017

Multi Converter Unified Power Quality Conditioner (MC-UPQC)

Impact Factor
8.01 (Year 2024)

UGC Approved
Journal no 47859

Join Our IPN

IJIRT Partner Network

Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.

Join Now

Latest Publication

Recent Conferences

NCSEM 2024

National Conference on Sustainable Engineering and Management - 2024 Last Date: 15th March 2024

Submit inquiry