Design of High Speed Clocked Comparators: A Survey

VISHAL GANPAT DALVI; deepak sharma

Design of High Speed Clocked Comparators: A Survey

Authors: VISHAL GANPAT DALVI , deepak sharma

Unique Paper ID: 146635
Volume: 5
Issue: 1
PageNo: 420-423

Keywords: High speed ADCs Double-tail comparator Dynamic clocked comparator

Abstract:
Comparators are basic building elements for designing modern analog and mixed signal systems. Speed and resolution are two important factors which are required for high speed applications. This paper presents a design for an on chip high-speed dynamic latched comparator for high frequency signal digitization. The dynamic latched comparator consists of two cross coupled inverters comprising a total of 9 MOS transistors. The measured and simulation results show that the dynamic latched comparator design has higher speed, low power dissipation and occupying less active area compared to double tail latched and preamplifier based clocked comparators. A new fully dynamic latched comparator which shows lower offset voltage and higher load drivability than the conventional dynamic latched comparators has been designed. With two additional inverters inserted between the input-stage and output-stage of the conventional double-tail dynamic comparator, the gain preceding the regenerative latch stage was improved and the complementary version of the output-latch stage, which has bigger output drive current capability. Hence the paper lays down the foundation for a high speed comparator.

email to a friend

Cite This Article

ISSN: 2349-6002
Volume: 5
Issue: 1
PageNo: 420-423

Design of High Speed Clocked Comparators: A Survey

Available:https://ijirt.org/Article?manuscript=146635

16 Jun, 2020

Experimental Analysis of Fiber Concrete with Waste Material

10 Jun, 2019

SEISMIC ANALYSIS OF MULTISTORY BUILDING HAVING PLAN IRREGULARITIES WITH AND WITHOUT SHEAR WALL

31 May, 2019

The Test of Different Types with Waste Material in Hybrid Concrete

31 May, 2019

Channel Capacity Enhancement using MIMO Systems: A Survey

05 Apr, 2019

Reduce Seismic Behavior of Flat Slab Structures under Static and Seismic Analysis By The Shear Wall

20 Nov, 2018

An Efficient FIR Filter Design Using Enhanced Particle Swarm Optimization Technique

30 May, 2018

Study on Strength and Durability Characteristics of Concrete with Ternary Blend

06 May, 2018

Implementation of 16 bit RISC Processor by FSM

Impact Factor
8.01 (Year 2024)

UGC Approved
Journal no 47859

Join Our IPN

IJIRT Partner Network

Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.

Join Now

Latest Publication

Recent Conferences

NCSEM 2024

National Conference on Sustainable Engineering and Management - 2024 Last Date: 15th March 2024

Submit inquiry