Experimental Analysis of Fiber Concrete with Waste Material

Jitendra Badwaya; Dharmendra Kurmi

Experimental Analysis of Fiber Concrete with Waste Material

Authors: Jitendra Badwaya, Dharmendra Kurmi

Unique Paper ID: 149863
Volume: 6
Issue: 9
PageNo: 750-754

Keywords: Compressive strength steel fibre split tensile steel fibre

Abstract:
The strength of concrete is determined by using Flexural test and strength test of M40 concrete. Compressive strength, Flexural strength, Split tensile strength and Alkalinity test of concrete mixes made with and without steel fibre, sand and 6mm down basalt have determined at 7 & 28 days. The compressive and flexural strength have determined of 0.50%, 1%, 1.5%, 2%, 2.5% and 3%, steel fibre added M40 concrete. Results shows that the increase SF compressive strength of the cement is high as compare to M40 cement concrete. The compressive &flexural strength also determine for M40 with mix sand marble stone dust and kota stone dust,0.50%, 1%, 1.5% ,2%, 2.5% and 3%, steel fiber and 5% ,10%, 15%,20%,25% 30% mix sand of MSD, KSD. Compressive strength, split tensile strength and flexural strength test were performed and results were analyzed to associate with above fiber combinations. Based on experimental studies, the paper identifies fiber combinations that demonstrate maximum compressive, split tensile and flexural strength of concrete. Relationship between compressive strength and split tensile strength, compressive strength and flexural strength is presented. M-40 concrete has determined compressive strength for the 7 & 28 days material. The three material cubes have taken for compressive strength test, every cube of 28 days strength is higher than the 7 days material strength. The percentage of SF mix is increases in the concrete M40 so increases compressive strength of the concrete materials. M-40 concrete with mix sand of MSD, KSD5% ,10%, 15%,20%,25% 30% by wt of sand and SF compressive strength for the 7 & 28 days material. The three material cubes have taken for compressive strength test, every cube of 28 days strength is higher than the 7 days material strength. The percentage of SF mix is increases in the concrete M40 so increases compressive strength of the concrete materials. The three material (M-40 concrete with mix steel fibre and sand) beams have taken for strength test, every beam of 28 days strength is higher than the 7 days material strength. The percentage of SF mix is increases in the concrete M40 so increases strength of the concrete materials

email to a friend

Cite This Article

ISSN: 2349-6002
Volume: 6
Issue: 9
PageNo: 750-754

Experimental Analysis of Fiber Concrete with Waste Material

Available:https://ijirt.org/Article?manuscript=149863

10 Jun, 2019

SEISMIC ANALYSIS OF MULTISTORY BUILDING HAVING PLAN IRREGULARITIES WITH AND WITHOUT SHEAR WALL

31 May, 2019

The Test of Different Types with Waste Material in Hybrid Concrete

31 May, 2019

Channel Capacity Enhancement using MIMO Systems: A Survey

05 Apr, 2019

Reduce Seismic Behavior of Flat Slab Structures under Static and Seismic Analysis By The Shear Wall

20 Nov, 2018

An Efficient FIR Filter Design Using Enhanced Particle Swarm Optimization Technique

06 Jun, 2018

Design of High Speed Clocked Comparators: A Survey

30 May, 2018

Study on Strength and Durability Characteristics of Concrete with Ternary Blend

06 May, 2018

Implementation of 16 bit RISC Processor by FSM

Impact Factor
8.01 (Year 2024)

UGC Approved
Journal no 47859

Join Our IPN

IJIRT Partner Network

Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.

Join Now

Latest Publication

Recent Conferences

NCSEM 2024

National Conference on Sustainable Engineering and Management - 2024 Last Date: 15th March 2024

Submit inquiry